303E-3 busbar punching shearing bending busbar shear machine

303E-3 busbar punching shearing bending busbar shear machine

Main Function：
To cut/punch(all kingds of round/square/special holes and slot type)/chamfer/horizontal bending/vertical
bending/ emboss/Press cable thread /twist/anti-press flat the copper/aluminum busbar ect.
Function Introduction
●● 1. Cutting unit adopts double-column shear structure (patent number: ZL201120262802.1),Cut mouth flat, no
burr, no waste.
●● 2. Punching unit adopts Nodular cast iron,4/6/8 modes position turrent punching structure which is a totaly
whole one,improving concentric degree of moulds,prolonging the service life of the moulds,saving time of
change.
●● 3. Bending unit adopts closed bending structure,making it is more uniform when processing horizontal bending
and embossing. Also prolonging the service life.
●● 4. Bending unit adopts double work table,achieved a real sense of the three position working at thge same time
while working without impact each other.
●● 5. Adopting PLC controlled,compared to the traditional relay,more stable and reliable.
●● 6. Three units of the machine can work at the same time,not affecting each other,Improving the processing
efficiency.
●● 7. Hydraulic tank with thick plate welding,and is treated by phosphating, making hydraulic oil can be long time
used and will not degenerate.

The Paramter：